A-Neuvideo ANI-8X2MFS Instruction Manual page 36

A NEUVIDEO
Serial and Telnet Commands
COMMAND
GET IN 8 PHASE 8
SET IN 8 CLOCK N1 8
GET IN 8 CLOCK 8
SET IN 8 HPOSITION N1 8
GET IN 8 HPOSITION 8
SET IN 8 VPOSITION N1 8
GET IN 8 VPOSITION 8
SET OUT A VIDEO MODE N1 8
GET OUT A VIDEO MODE 8
SET FACTORY VGA DEFAULT 8
SET VGA AUTO ADJUST MODE 8
SET OUT A BLANK 8
SET OUT A BLANK N1 8
SET OUT A FREEZE N1 8
GET OUT A FREEZE 8
SET OUT A OSD TIMER N1 8
GET OUT A OSD TIMER 8
SET OUT A OSD VPOSITION N1 8
GET OUT A OSD VPOSITION 8
SET OUT A OSD HPOSITION N1 8
GET OUT A OSD HPOSITION 8
SET OUT A OSD TRANSPARENCY
LEVEL N1 8
DESCRIPTION AND PARAMETERS
Show the current PC phase value for the VGA input.
Set the PC clock value for the VGA input.
N1 = 0~250 [PC clock]
Show the current PC clock value for the VGA input.
Set the PC horizontal position for the VGA input.
N1 = 0~250 [Horizontal position]
Show the current PC horizontal position for the VGA input.
Set the PC vertical position for the VGA input.
N1 = 0~250 [Horizontal position]
Show the current PC vertical position for the VGA input.
Enable or disable the video output bypass mode.
Available values for N1:
0 [Video bypass disabled]
1 [Video bypass enabled]
Show the current video output bypass mode state.
Reset the VGA input settings to the factory defaults.
Activate the auto detection of the current VGA source's parameters.
Enable or disable blanking the video output
Available values for N1:
0 [Video output normal]
1 [Video output blanked]
Show the current video output blanking state.
Enable or disable freezing the video output.
Available values for N1:
0 [Video output normal]
1 [Video output frozen]
Show the current video output freeze state.
Set the OSD menu's timeout value.
Available values for N1:
0 [Timeout disabled]
1 [5 seconds]
2 [10 seconds]
3 [15 seconds]
4 [20 seconds]
5 [25 seconds]
Show the current OSD menu timeout value.
Set the vertical position of the OSD menu.
N1 = 0~100
[Vertical position]
Show the current vertical position of the OSD menu.
Set the horizontal position of the OSD menu.
N1 = 0~100 [Horizontal position]
Show the current vertical position of the OSD menu.
Set the transparency level of the OSD menu.
N1 = 1~8 [Transparency level]
34
Serial & Telnet Commands
6 [30 seconds]
7 [35 seconds]
8 [40 seconds]
9 [45 seconds]
10 [50 seconds]
11 [55 seconds]
12 [60 seconds]