Table of Contents
Advertisement
A
NEUVIDEO
BACK PANEL
CAT5E/6/7 OUT PORT:
g
signals. PoH will also be supplied to a connected compatible PD receiver. (ANI-7251RX)
SERVICE PORT:
This port is reserved for firmware update use only.
h
LAN PORT:
Connect directly, or through a network switch, to your PC/ laptop to control the unit via Telnet/WebGUI and to extend the
j
network across the HDBaseT™ connection.
DC24V 4-PIN DIN PORT:
k
Connect to a compatible HDBaseT™ receiver with a single CAT5e/6/7 cable for transmission of all data
Plug the 24V DC power adapter into this port and connect it to an AC wall outlet for power.
10
BACK PANEL
Advertisement
Table of Contents
