Table of Contents
Advertisement
FRONT PANEL
2
(1) Power indicating LED. It will stay red when the unit is connected to power.
(2) USB input. While used to support fi rmware updates (provided under technical support from the factory) It can work as a USB
fl ash drive, supporting JPEG picture presentation playing, and MP3 audio playing. It is operated under the OSD.
(3) Video source selection buttons. You can select the video/audio source using these six buttons.
(4) Use the MENU button to active OSD (on-screen display), working with the direction keys. When pressed, will cycle thru Picture
setting, Audio setting, System setting and USD setting mode. The MENU button is also used to cancel the last operation.
(5) The ENTER button, when used with MENU button and the direction keys "sets" any changes. When in the USB mode, the
ENTER button also acts as the confi rm function.
(6) IR sensor. It is for IR remote controlling, receiving the signal of the included IR remote.
(7) The direction keys; when in the OSD mode, the four buttons are used to navigate the available options. When OSD is off, using
only the left button and the right button will control the volume level (VOL-, VOL+).
REAR PANEL
(1) Power port. Connecting the 12VDC power.
(2) RS-232 control port. It works with the third-party controller, for bi-directional RS-232 commands.
(3) VGA and stereo audio input. It supports the different resolutions and format.
(4) YPbPr and stereo audio input.
(5) S-Video/C-Video and stereo audio input. They share the same stereo audio.
(6) Stereo Line Level audio output. All the input audio will be switched to this output, including the embedded HDMI audio.
(7) HDMI output. Embedded digital audio, with volume adjustable.
(8) HDMI inputs. Supports HDCP1.3
(9) Coaxial audio output, with SPDIF format.
FRONT AND REAR PANEL
1
3
1
2
3
7
6
8
4
5
3
4
8
9
4
6
7
5
Advertisement
Table of Contents
