Transaction Password Protection - Ingenico iCT250 Quick Reference Manual

4. Press [5] or use [▼] button to scroll down to highlight Reports
Menu PWs, press [Enter].
5. Press [▼] button to scroll down to highlight the associated
parameter and press [Enter].
Select which password ([1]-Off, [2]-Supervisor, [3]-Manager, [4]-
6.
Administrator or [5]-Clerk) you want to use for protection of the
selected report menu option.

Transaction Password Protection

All transactions, regardless of tender type, can be password protected
and can be configured at the terminal level.
Transactions that are set up to be password protected will not require
entry of a user name. The transaction will be configured to prompt for an
administrator, manager, supervisor or clerk password. The application
will accept the required password and any qualified higher level
passwords as shown in the password hierarchy.
The table below shows a list of the transactions that can be password
protected and the associated parameters:
Main Menu Option
Return
Force
PreAuth
Settlement
Reprint
The password protection screen will be presented to the user upon
initiating a transaction
1. At idle menu press [.,#*] for the administrator menu.
Sale
Void
Associated Parameter
PWSale
PWReturn
PWVoid
PWForce
PWPre-Auth
PWSettle
PWReprint
31