Reports Menu Password Protection - Ingenico iCT250 Quick Reference Manual

3. Press [6] or use [▼] button to scroll down until Security is
highlighted.
4. Press [4] or use [▼] button to scroll down to highlight
Administrator Menu PWs and press [Enter].
Press [▼] button to scroll down to highlight the associated
5.
parameter and press [Enter].
6. Select which password ([1]-Off, [2]-Supervisor, [3]-Manager, [4]-
Administrator or [5]-Clerk) you want to use for protection of the
selected administrator menu option.

Reports Menu Password Protection

All menu options in the reports menu can be password protected and
can be configured at the terminal level.
Reports menu options will be configured to prompt for an administrator,
manager, supervisor or clerk password. Reports menu options that are
set up to be password protected will not require entry of a user name.
The application will accept the required password and any qualified
higher level passwords as shown in the password hierarchy.
The table below shows a list of the reports menu options that can be
password protected and the associated parameters:
Reports Menu
Clerk Report
Detail Report
Summary Report
Open Pre-Auth Report
The password protection screen will be presented to the user upon
accessing one of the above Reports Menu options from the Reports
Menu.
1. At idle menu press [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password, and
then press [Enter].
Press [6] or use [▼] button to scroll down to highlight Security.
3.
Option
Associated Parameter
PWClerkTpt
PWDetail
PWSummary
PWPreAuthRpt
30