Print Clerk Id List; Clerk Prompt; Clerk Wording - Ingenico iCT250 Quick Reference Manual

4. Select [2] to highlight Delete ID.
5. Enter clerk ID and press [Enter].
6. Terminal will display "Clerk Deleted" if it is successfully deleted.

Print Clerk ID List

This option allows you to print a list of the clerks. After the list completes
printing, the terminal returns to the clerk menu. Select [3] Print ID List
to print the ID list.
1. At idle menu press [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password, and
then press [Enter].
3. Select [1] to highlight Clerk Menu.
4. Select [3] to highlight Print ID List.

Clerk Prompt

This section is used to enable clerk prompting. If clerk prompting is
enabled, you will be prompted for either the ID or ID plus Name. If there
is at least one record in the open batch or pre auth batch, the error
message "Must Settle Batch" or "Pre-Auth Existing" is shown and the
user is not allowed to change this setting.
At idle menu press [.,#*] for the administrator menu.
1.
2. Key in the administrator name and administrator password, and
then press [Enter].
Select [1] to highlight Clerk Menu.
3.
Select [5] to highlight Clerk Prompt.
4.
Select [1] for Off, [2] for ID Only or [3] for ID & Name.
5.

Clerk Wording

This section sets the wording of the clerk prompt.
At idle menu press [.,#*] for the administrator menu.
1.
2. Key in the administrator name and administrator password, and
then press [Enter].
Select [1] to highlight Clerk Menu.
3.
Select [6] to highlight Clerk Wording.
4.
Select [1] for Clerk, [2] for Server or [3] for Cashier.
5.
27