Transaction Password Protection - Ingenico iWL255 Quick Reference Manual

Report Menu
Option
Clerk Report
Detail Report
Summary Report
Open Pre-Auth
Report
The password protection screen will be presented to the user upon
accessing one of the above reports menu options from the reports
menu.
1. At idle menu press [.,#*] for the administrator menu.
2. Key in the administrator name and administrator password, and
then press [Enter].
Press [6] or use [▼] button to scroll down to highlight Security.
3.
Press [5] or use [▼] button to scroll down to highlight Reports
4.
Menu PWs, press [Enter].
Press [▼] button to scroll down to highlight the associated
5.
parameter and press [Enter].
6. Select which password ([1]-Off, [2]-Supervisor, [3]-Manager, [4]-
Administrator or [5]-Clerk) you want to use for protection of the
selected report menu option.

Transaction Password Protection

All transactions, regardless of tender type, can be password protected
and can be configured at the terminal level.
Transactions that are set up to be password protected will not require
entry of a user name. The transaction will be configured to prompt for an
administrator, manager, supervisor or clerk password. The application
will accept the required password and any qualified higher level
passwords as shown in the password hierarchy.
The table below shows a list of the transactions that can be password
protected and the associated parameters:
Associated Parameter
PWClerkRpt
PWDetail
PWSummary
PWPreAuthRpt