Set Device Language; Reboot The Device; Reset To Factory Default - Fanvil X4 User Manual

6.5

Set Device Language

When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Settings] item.

Enter [Settings] item till you find the [Basic Settings] item.

Enter [Basic Settings] item till you find [Language] item.

User can change the language by using the navigation keys.

6.6

Reboot the Device

When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Reboot System] item.

Press [OK] or [Enter] button, a warning message "Reboot Now?" will be prompt to user.

Press [Yes] or [OK] button to execute the reset command, or [No] to exit.

6.7

Reset to Factory Default

When the device is in the default standby mode,
Press soft-button [Menu] till you find the [Settings] item, and press [OK] or [Enter] button.

Enter [Advanced Settings] item, then input the device PIN (Default PIN is 123) to enter the

interface.
Enter [Reset to Default] item, then a warning message "Factory Reset, Continues?" will be

prompt to user.
Press [Yes] or [OK] button to execute the reset command, or [No] to exit.

Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605
DD-MM-YYYY

MM-DD-YY

MM-DD-YYYY

YY-MM-DD

YYYY-MM-DD

Email: sales@fanvil.com support@fanvil.com
<文档标题>