Lines / Dial Plan; Lines / Basic Settings; Figure 47 - Dial Plan Configuration; Table 4 - Basic Settings For Lines On Web - Fanvil X4 User Manual

7.14

LINES / Dial Plan

The device supports 8 dialing modes:
Press # to Send - Dial the desired number, and press # to send it to the server.

Dial Fixed Length – Configure the fixed length to dial out

Send after seconds – Number will be sent to the server after the specified time.

Press # to Do Blind Transfer - Press # after entering the target number for the transfer. The

phone will transfer the current call to the third party.
Blind Transfer on onhook - Hang up after entering the target number for the transfer. The phone

will transfer the current call to the third party.
Attended Transfer on Onhook - Hang up after the third party answers. The phone will transfer

the current call to the third party.
Attended Transfer on Conference Onhook - Hang up during a 3-way conference call, the other

two ways will make a call.
Press DSS Key to Do Blind Transfer – When user is in the 'XFER' screen, user can fulfill Blind

Transfer by pressing DSS Key.
7.15

LINES / Basic Settings

Configure basic settings for lines,
Parameters
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605

Figure 47 - Dial Plan Configuration

Table 4 - Basic Settings for Lines on Web

Description
Email: sales@fanvil.com support@fanvil.com
<文档标题>