Home PBXware SERVERware TELCOware SIPmon SIPProt Desktop & Mobile UADs Appliances From Bicom Systems Wiki Contents 1 Introduction 2 Requirements 2.1 Identifying Phone Model 2.2 Phone Firmware 2.3 DHCP Server 2.4 PBXware Version 3 Installation 3.1 Power Adapter 3.2 Power over Ethernet (PoE) 3.3 Find the Phone's IP Address 3.4 Reset to factory settings 4 Registering Phone...
Make sure that the phone is loaded with an appropriate firmware version, 2.4.5. To find out the firmware version of the Fanvil phone model, open a new browser window and enter the phone's IP address in order to access the phone's web administration interface login screen.
DHCP Server Fully configured and operational DHCP server. PBXware Version PBXware version In order to find out the PBXware version: Log in to PBXware Navigate to Settings: About. On the top of About page, you may see a code similar to this one PBXware Edition: Multi- Tenant Release: 6.5.0.0 (41a4f0e6) Running: 16.16.1-gc-c0d40968, Proxy v6.5.0...
Make sure that the Ethernet cable and router or switch is Power over Ethernet (PoE) compliant. Find the Phone's IP Address Press the OK key Go to Status and press OK The IP address will be shown on the display. Reset to factory settings This step is not required for brand new out-of-the-box phones, however, if the phone has been already used then it is a must.
Page 5
UAD Settings Navigate to Settings:UAD. Make sure Fanvil UAD is enabled. To check the UAD status, click the Edit icon corresponding to the Fanvil phone. Make sure Status is set to Active, Auto provisioning is set to No, and DHCP is set to Yes.
Department to which Extension belongs to. Example: Sales. Click Save. Registering a Phone This section describes how to register a Fanvil phone using Hostname or IP Address. Hostname or IP Address Log in to the phone's web administration interface Open a new browser window and enter the phone's IP address in order to access the phone's web administration interface login screen.
The Secret of the Extension as received in the e-mail associated with this Extension. Example: _%Z4M3*Ts9y7. A password is generated automatically for each newly created Extension. Activate Make sure the Activate check box is selected. SIP Proxy Server Address Enter the Hostname or IP Address of PBXware. - Example of a Hostname: voip.bicomsystems.com - Example of an IP Address: 192.168.1.10 Click Apply.
Page 8
UAD Settings Navigate to Settings: UAD. Make sure Fanvil UAD is enabled. To check the UAD status, click the Edit icon corresponding to the Fanvil phone. Make sure Status is set to Active, Auto provisioning is set to Yes, and DHCP is set to Yes.
Page 9
Click Save. Registering Phone This section describes how to register a Fanvil phone using TFTP & HTTP. TFTP & HTTP Open a new browser window and enter the phone's IP address, e.g. http://192.168.1.22.
Configure BLF Extension Settings This section describes how to configure BLF (Busy Lamp Field) for Fanvil X6U. Log in to the PBXware's web administration interface. Open a new browser window and enter the IP address in order to access the PBXware's web...
administration login page. Example: http://192.168.1.10. Log in to PBXware with the e-mail address and password. Edit an Extension On the Extensions page, click the Edit icon corresponding to the Extension. Click Advanced Options. Navigate down to the Auto Provisioning and Presence group of settings. Make sure Auto Provisioning is set to Yes.
Need help?
Do you have a question about the X6U and is the answer not in the manual?
Questions and answers