Make / Receive Second Call; Figure 18 - Second Incoming Call Screen - Fanvil X4 User Manual

When user finished the call, user can put the handset back to the device to hang up the call or press
the hands-free button to close the audio channel to hang up.
NOTICE! When the call is held or in holding state, the user must press [Resume] button to
back to call mode, or putting the handset back to the device or pressing Speaker-free button
to hang up is not available.

Make / Receive Second Call

5.1.1
The device supports multiplex calls concurrently (up to 10). When there is already a call established,
user can still answer another incoming call on either lines or make a second call on either lines.
Second Incoming Call

When there is another incoming call during talking a phone call, this call will be waiting for user to
answer it. User will see the call message in the middle of current screen. The device will not be
ringing but playing call waiting tone in the audio channel of the current call and the LED will be
flashing in green. User can accept or reject the call same as normal incoming call. When the waiting
call is answered, the first call will be put on hold automatically.
Second Outgoing Call

To make a second call, user may press [XFER] / [Conf] button to make a new call with the default
line or press the line key to make new call with other line. Another alternative for making second call
is to pressing DSS Keys dial out from the configured Keys (BLF/Speed Dial). When user is making a
second call with the above methods, the first call could be place on hold manually first or will be put
on hold automatically at second dial.
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605

Figure 18 - Second Incoming Call Screen

Email: sales@fanvil.com support@fanvil.com
<文档标题>