Auto-Answering; Figure 32 - Configure Dnd On Line - Fanvil X4 User Manual

If user wishes to enable or disable DND on a specific line, user could change the DND mode in DND
configurations.
Press soft-button [Menu] till you find the [Features] item.

Enter [Features] item till you find the [DND] item.

Enter DND edit page

Press left/right navigation key to change the DND mode or DND state on specific line. When

done, press [Save] button to save the changes.
User will see icon

5.7

Auto-Answering

User may enable auto-answering feature on the device and any incoming call will be automatically
answered (not including call waiting). The auto-answering can be enabled on line basis.
When the device is in the default standby mode, if user wishes to enable or disable auto-answering
on a specific line or change the auto-answering delay time, user could change the auto-answering
configuration with following steps.
Press soft-button [Menu] till you find the [Features] item.

Enter [Features] item till you find the [Auto Answer] item.

Enter [Auto Answer] item to change the auto-answering configuration on a specific line

Press left/right navigation button to select the auto-answering option. When done, press [Save]

button to save the changes.
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605
'Do Not Disturb' against the enabled line.

Figure 32 - Configure DND on Line

Email: sales@fanvil.com support@fanvil.com
<文档标题>