Operation Description; Peer Telephone Set Is Busy (Call Waiting Disabled) - Fanvil X3S Software Installation & Configuration

4

Operation Description

4.1 Peer Telephone Set Is Busy (Call Waiting Disabled)

1. On the webpage of the test telephone set, choose Phone Settings > Features > Common
Settings and select Enable Call Completion. Alternatively, choose Menu > Features > Call
Completion on the LCD of the test telephone set, select Enabled, and click Save. Disable call
waiting for the peer telephone set B.
2. B is in a call with C. The test telephone set calls Bin hands-free, handle, or headset mode. The
test telephone set displays the message "Call Completion. Wait xxx", as shown in the following
figure.
3. In the dialog box prompting "Call Completion. Wait xxx":
(1) If you click Exit, the test telephone set exits the screen prompting "Call Completion. Wait
xxx" and returns to the standby screen. When B ends the call or is idle, the test telephone set
does not display the message "Call Completion. Call xxx".
(2) If you click OK, the test telephone set exits the screen prompting "Call Completion. Wait
xxx" and returns to the standby screen. When B ends the call or is idle, the test telephone set
displays the message "Call Completion. Call xxx" (xxx indicates the phone number of B) in
about 30s, as shown in the following figure.