Lines / Dial Peer; Table 3 - Dial Peer Settings For Lines On Web - Fanvil X4 User Manual

BLF List Number
SIP Encryption
SIP Encryption Key
RTP Encryption
RTP Encryption Key
7.13

LINES / Dial Peer

This functionality offers you more flexible dial rule, you can refer to the following content to know
how to use this dial rule.
Parameters
Phone number
Note: Two different special characters are used.
x -- Matches any single digit that is dialed.

[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated

by commas, or a list of digits.
Destination
Port
Alias
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605
not support subscription package, the registered
server and subscription server will be separated.
BLF List allows one BLF key to monitor the
status of a group. Multiple BLF lists are
supported.
Enable
transmission will be encrypted
Set the pass phrase for SIP encryption
Enable
transmission will be encrypted
Set the pass phrase for RTP encryption

Table 3 - Dial Peer Settings for Lines on Web

Description
There are two types of matching: Full Matching
or Prefix Matching. In Full matching, the entire
phone number is entered and then mapped per
the Dial Peer rules.
In prefix matching, only part of the number is
entered followed by T. The mapping with then
take place whenever these digits are dialed.
Prefix mode supports a maximum of 30 digits.
Set Destination address. This is for IP direct.
Set the Signal port, and the default is 5060 for
SIP.
Set the Alias. This is the text to be added,
Email: sales@fanvil.com
SIP encryption such
RTP encryption such
support@fanvil.com
<文档标题>
that SIP
that RTP