Voice Message; Figure 29 - New Voice Message Notification - Fanvil X4 User Manual

User can also filter call logs with specific call log type to narrow down the call log records by
pressing the left/right navigation button and select one of the call log types in the soft-menu buttons,
5.5

Voice Message

If the service of the lines supports voice message feature, when the user is not available to answer
the call, the caller can leave a voice message on the server to the user. User will receive voice
message notification from the server and device will prompt a voice message waiting icon on the
standby screen,
To retrieve the voice messages, user must configure the voice message number first. Once the
voice message number is configured, user can retrieve the voice message of a line by pressing the
[Dial] button in the voice message screen.
When the device is in the default standby mode,
Click the [MWI] button.（As default , there is a configured MWI DSSKEY, You can also press

[Menu] / [Applications] / [Voice Massage] to enter MWI interface]））
Open voice message configuration interface, select the line to be configured with up/down

navigation keys.
Press [Edit] button to enable and edit the voice message number, when done, press [OK] /

[Save] button to save the configuration.
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605

Figure 29 - New Voice Message Notification

Email: sales@fanvil.com support@fanvil.com
<文档标题>