Phone / Time/Date; Table 8 - Time/Date Setting Parameters On Web - Fanvil X4 User Manual

7.19

PHONE / Time/Date

User can configure the device time settings in this page.
Parameters
Network Time Server Settings
Time Synchronized via SNTP
Time Synchronized via DHCP
Primary Time Server
Secondary Time Server
Timezone
Resync Period
12-Hour Clock
Date Format
Daylight Saving Time Settings
Location
DST Set Type
Offset
Month Start
Week Start
Weekday Start
Hour Start
Minute Start
Month End
Week End
Weekday End
Hour End
Manual Time Settings
Fanvil Technology Co., Ltd
HQ Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II）, 67th District, Bao'An, Shenzhen, China 518101 P.R.
Tel: +86-755-2640-2199 Fax: +86-755-2640-2618
Beijing Tel:+86-10-5753-6809 Suzhou Tel: +86-512-6592-0605

Table 8 - Time/Date Setting Parameters on Web

Description
Enable time-sync through SNTP protocol
Enable time-sync through DHCP protocol
Set primary time server address
Set secondary time server address, when
primary server is not reachable, the device will
try to connect to secondary time server to get
time synchronization.
Select the time zone
Time of re-synchronization with time server
Set the time display in 12-hour mode
Select the time/date display format
Select the user's time zone specific area
Select automatic DST according to the preset
rules of DST, or the manually input rules
The DST offset time
The DST start month
The DST start week
The DST start weekday
The DST start hour
The DST start minute
The DST end month
The DST end week
The DST end weekday
The DST end hour
Set time manually
Email: sales@fanvil.com support@fanvil.com
<文档标题>