Auto-Answering - Fanvil X3SP User Manual

6.7

Auto-Answering

User may enable auto-answering feature on the device and any incoming call will be automatically
answered (not including call waiting). The auto-answering can be enabled on line basis.
When the device is in the default standby mode, if user wishes to enable or disable auto-answering
on a specific line or change the auto-answering delay time, user could change the auto-answering
configuration adopt following steps.

Press soft-button [Menu] till you find the [Features] item.

Enter [Features] item till you find the [Auto Answer] item.

Enter [Auto Answer] item to change the auto-answering configuration on a specific line

Press left/right navigation button to select the auto-answering option. When done, press [Save]
button to save the changes.

The default auto-answering delay is 5 seconds.
Figure 59 - Configure Auto-answering on Line1
<文档标题>