Do-Not-Disturb; Auto-Answering; Figure 56 - Dnd Enabled On All Lines; Figure 57 - Configure Dnd On Line - Fanvil X2C User Manual

6 6 .6

Do-Not-Disturb

User may enable Do-Not-Disturb (DND) feature on the device to reject incoming calls (including call
waiting). The DND can be enabled on line basis.

Press [Menu] -> [Function] -> [DND] button to enable DND on all line and icon
the screen.

when select the not enable DND, will disable DND on all line and icon
If user wishes to enable or disable DND on a specific line, user could change the DND mode in DND
configurations.

Press soft-button [Menu] till you find the [Features] item.

Enter [Features] item till you find the [DND] item.

Enter [DND] item till you find [DND item.

Press left/right navigation key to change the DND mode or DND state on specific line. When done, press
[Save] button to save the changes.

User will see icon
6 6 .7

Auto-Answering

User may enable auto-answering feature on the device and any incoming call will be automatically
answered (not including call waiting). The auto-answering can be enabled on line basis.
When the device is in the default standby mode, if user wishes to enable or disable auto-answering on a
specific line or change the auto-answering delay time, user could change the auto-answering configuration
adopt following steps.
User Press auto answer key, enable or disable auto answer the function. User could change the auto
answer the function in menu configurations.

Figure 56 - DND Enabled on All Lines

'Do Not Disturb' against the enabled line.

Figure 57 - Configure DND on Line

31 / 64
will be displayed on
be disappeared.