[Video Out/Lcd/Vf] Menu - Panasonic HC-X1500 Operating Instructions Manual

[OUTPUT SETTINGS]
[AUDIO OUT]
Sets the audio channel and the format to output from the headphone terminal, and the built-in speaker.
[CH1]
[CH2]
[CH1/2 STEREO]
[CH1/2 MIX]
(Factory setting: [CH1/2 STEREO])
[ALARM]
Sets whether to have an alarm sound.
The alarm is output from the speaker of this unit or the headphones. It is not output to external output destinations.
[BATTERY END]
Sets whether to sound the alarm when the remaining battery level is exhausted.
The items that can be set are as follows.
≥ [HIGH], [LOW], [OFF]
(Factory setting: [OFF])
[MEDIA END]
Sets whether to sound the alarm when the remaining recording capacity of the memory card is exhausted.
The items that can be set are as follows.
≥ [HIGH], [LOW], [OFF]
(Factory setting: [OFF])
[WARNING]
Sets whether to sound the alarm when a system error or warning occurs.
The items that can be set are as follows.
≥ [HIGH], [LOW], [OFF]
(Factory setting: [OFF])

[VIDEO OUT/LCD/VF] menu

Configures the settings for the external output, the information to display in the LCD monitor or viewfinder and the output format.
X2000
[VIDEO OUT SEL]
Switches the output destination for images and audio.
[SDI]
[HDMI]
(Factory setting: [HDMI])
X2000
[SDI OUT]
¥ Set the [VIDEO OUT/LCD/VF] menu → [VIDEO OUT SEL] to [SDI].
[OUT FORMAT]
Selects the signal to output from the <SDI OUT> terminal. The items that can be selected differ depending on the [SYSTEM] menu → [FREQUENCY]/
[FILE FORMAT]/[REC FORMAT] setting.
[1920×1080p]
[1920×1080i]
[1920×1080PsF]
[1280×720p]
(Factory setting: [1920×1080i])
@ NOTE
0 For the combinations that can be set, refer to "Format that can be output from the <SDI OUT> terminal [X2000]". ( l 154)
[SDI AUDIO GAIN CHG]
Adjusts the gain for the audio signal output from the <SDI OUT> terminal.
The items that can be set are as follows.
≥ [0dB], [j6dB], [j8dB]
(Factory setting: [j6dB])
Chapter 4 Operation — Menu settings
Outputs the signal for audio channel 1 as monaural.
Outputs the signal for audio channel 2 as monaural.
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. Outputs as monaural from the built-in speaker.
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.
Outputs from the <SDI OUT> terminal.
Outputs from the <HDMI> terminal.
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1920×1080PsF.
Outputs in 1280×720p.
- 72 -