Tv/Monitor - Panasonic HC-X1500 Operating Instructions Manual

Chapter 8 Connecting to External Devices — Connecting with headphones and TV/monitor

TV/monitor

A TV or monitor can be connected as shown in the following figure.
≥ When using , use a BNC cable (<SDI OUT> terminal) to connect a TV/monitor.
X2000
(For the )
A
X2000
BNC cable (commercially-available)
HDMI cable (commercially-available)
B
TV/Monitor
C
≥ By connecting this unit to a 4K video compatible TV/monitor using an HDMI cable, and playing back clips recorded with a recording format that has a
resolution of UHD (3840×2160), you can enjoy the finely detailed video provided by 4K videos. If the TV/monitor is not compatible with 4K video, you
can set [OUT FORMAT] and reduce the output resolution for playback. (l 155)
@
NOTE
When using a DVI converter, etc., to connect an HDMI cable to this unit, make sure that you connect last to the <HDMI> terminal on this unit.
Connecting first to the <HDMI> terminal on this unit may cause a malfunction.
0 VIERA Link is not supported on the unit. Note that the VIERA Link of other device may not properly operate when connected to the VIERA Link
compatible device with a HDMI cable (commercially-available).
0 The SD resolution signal output from the <HDMI> terminal is output as a progressive signal (480P, 576P).
0 (For the )
X2000
Use a commercially-available 5C-FB or equivalent double-shielded cable for the BNC cable.
0 Use a commercially-available High Speed HDMI cable. If possible, we recommend using a cable with a length of 3 m or less.
0 When this unit is connected to a TV/monitor while displaying the camera image screen, there may be some howling
button to switch to the thumbnail screen first before connecting this unit to a TV/monitor.
* The microphone can pick up the sounds coming from the speaker which can cause unusual sounds.


- 166 -

* caused. Press the <THUMBNAIL>