Confirming The Network Status - Panasonic HC-X1500 Operating Instructions Manual

0 When [DHCP] is set to [CLIENT], some of the information acquired automatically with DHCP is displayed in the menu.
For details of the network status, confirm by selecting the [NETWORK] menu → [INFORMATION] → [STATUS].
0 All of the IP address, subnet mask, and default gateway must be correctly set.
For details, contact the network administrator.
0 When the default gateway or DNS is not to be used, set to [0.0.0.0].
However, DNS cannot be disabled when [DHCP] is set to [CLIENT].
0 Depending on the network environment, even if [DHCP] is set to [CLIENT], entry of the DNS value manually may be required. When invalid DNS value
is entered in any other cases, the automatic assignment by DHCP will not operate properly.

Confirming the network status

The network status of the unit can be checked by performing the following operation.
1
Select the [NETWORK] menu → [INFORMATION] → [STATUS].
Chapter 9 Network Connection — Network settings
- 174 -