[Camera] Menu - Panasonic HC-X1500 Operating Instructions Manual

[CAMERA] menu

Sets the basic functions of the camera.
This menu cannot be set when the thumbnail screen is displayed.
[SW MODE]
[ZOOM RING]
Sets the rear ring 1 direction and zoom control when performing zoom operations.
[DOWN TELE]
A
A
[UP TELE]
B
B
(Factory setting: [DOWN TELE])
[IRIS RING]
Sets the rear ring 1 direction and iris control when adjusting the iris.
[DOWN OPEN]
A
A
[UP OPEN]
B
B
(Factory setting: [DOWN OPEN])
[SUPER GAIN]
Sets the super gain to be assigned to the USER button.
When [ALL] is selected, each time you either press the USER button or touch the USER button icon, the selection switches in the order [SUPER GAIN],
[SUPER GAIN+], normal gain.
The items that can be set are as follows.
≥ [SUPER GAIN], [SUPER GAIN+], [ALL]
(Factory setting: [SUPER GAIN])
[AGC LIMIT]
Sets the maximum gain value during [AGC] operation.
The items that can be set are as follows.
≥ [3dB], [6dB], [12dB], [18dB], [24dB], [30dB]
(Factory setting: [30dB])
[O.I.S.]
Switches enable/disable of the optical image stabilizer function.
If [O.I.S.] is assigned to the USER button, pressing the USER button switches [ON]/[OFF].
For details about optical image stabilizer, refer to "Optical image stabilizer function". (l 135)
[ON]
[OFF]
(Factory setting: [ON])
[HYBRID O.I.S.]
Switches enable/disable of the hybrid optical image stabilizer function.
For details about optical image stabilizer, refer to "Optical image stabilizer function". (l 135)
[ON]
[OFF]
(Factory setting: [ON])
[O.I.S. MODE]
Switches the operation mode of the optical image stabilizer function.
[NORMAL]
[PAN/TILT]
[STABLE]
(Factory setting: [NORMAL])
Chapter 4 Operation — Menu settings
Zooms in when turned towards the B side.
Zooms in when turned towards the A side.
Iris opens when turned towards the B side.
Iris opens when turned towards the A side.
Enables the optical image stabilizer function.
Disables the optical image stabilizer function.
Enables the hybrid optical image stabilizer function.
Disables the hybrid optical image stabilizer function.
Specifies the standard setting for a good balance of correction for large and small camera shake.
Specifies a setting appropriate for shooting that uses a lot of panning and tilting of the camera.
Specifies a setting appropriate for fixing a composition to shoot a subject.
- 62 -