Panasonic HC-X1500 Operating Instructions Manual page 78

[PLAYBACK STATUS]
Switches display/hide of the playback status.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[MARKER]
[CENTER MARKER]
Switches the type of center marker.
[1]
[2]
[3]
[4]
[OFF]
(Factory setting: [1])
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1]
[2]
[OFF]
(Factory setting: [2])
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
≥ [4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]
(Factory setting: [OFF])
[FOCUS ASSIST]
[FOCUS ASSIST SW]
Sets how focus assist is set when the [FOCUS ASSIST] in the USER button is set.
[EXPAND]
[PEAKING]
[EXPAND&PEAKING]
(Factory setting: [EXPAND&PEAKING])
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC]
[HOLD]
[UNTIL REC]
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
≥ [×2], [×3], [×4]
(Factory setting: [×2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
≥ [LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
≥ [RED], [GREEN], [WHITE]
(Factory setting: [RED])
Chapter 4 Operation — Menu settings
i (large)
Open center (large)
i (small)
Open center (small)
Does not display.
Box
Corners
Does not display.
Sets the enlarged display.
Sets the peaking display.
Sets both [EXPAND] and [PEAKING].
Disables the enlarged display function after 10 seconds have elapsed.
Enables the enlarged display function until either the USER button assigned to [FOCUS ASSIST] is pressed again or the
USER button icon is touched again.
Enables the enlarged display function until performing recording operation.
- 78 -