Panasonic HC-X1500 Operating Instructions Manual page 133

5
Press the USER button to which [FOCUS ASSIST] is assigned or touch the USER button icon.
Press the USER button or touch the USER button icon again to return to the normal display.
Pressing the <EXIT> button also returns to the normal display.
Setting the mode for enlarged display function
1
Select the mode for the enlarged display function in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [EXPAND MODE].
[10SEC]: Disables the enlarged display function after 10 seconds have elapsed.
[HOLD]: Enables the enlarged display function until either the USER button assigned to [FOCUS ASSIST] is pressed again or the USER
button icon is touched again.
[UNTIL REC]: Enables the enlarged display function until starting the recording operation.
Setting the enlargement rate
1
Select the enlargement rate in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [EXPAND VALUE].
≥ The enlargement rate can be selected from [×2], [×3], or [×4].
Setting the enlargement position
You can select the central position of the enlarged display from the 9 base points.
In the case of the multidial: Turn the multidial to move the enlarged position. It will return to center when the
multidial is pressed.
In case of touching the LCD monitor: The enlarged position will move by touching the vertical and
horizontal arrow markers on the LCD monitor.
Base point
A
Screen actually recorded
B
Enlarged display part
C
Peaking display
The peaking display will outline the contour of the focused image in red, green, or white.
Peaking display
A
Displaying the peaking display
Set so enable/disable of peaking display can be switched with a USER button.
1
Switch to manual mode with the <AUTO/MANU> switch. (l 101)
2
Press the <FOCUS A/M/¶> button to switch to manual focus mode. (l 108)
3
Select [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [FOCUS ASSIST SW] → [EXPAND] or [EXPAND&PEAKING].
4
Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FOCUS ASSIST].
5
Press the USER button to which [FOCUS ASSIST] is assigned or touch the USER button icon.
Press the USER button or touch the USER button icon again to return to the normal display.
Setting the color for peaking display
Sets the color of the peaking display.
1
Select the color of the peaking display in the [VIDEO OUT/LCD/VF] menu → [FOCUS ASSIST] → [PEAKING COLOR].
≥ The color of the peaking display can be selected from [RED], [GREEN], or [WHITE].
Chapter 5 Shooting — Convenient shooting functions

- 133 -

 