Panasonic HC-X1500 Operating Instructions Manual page 150

Playback operation
Skip playback
(cue up of the clip)
Slow playback
Frame-by-frame playback
Direct playback
@
NOTE
0 If the operation icons are displayed but not touched for a while, the operation icons disappear. To display again, touch the screen.
0 Operations of the unit or some performance may become slow for the clip with large file size.
0 Operations of the unit or some performance may become slow when there are large number of clips on the memory card.
0 Playback will stop once by switching the card slot when MOV, MP4 or AVCHD is selected as the recording file format, and the [THUMBNAIL] menu →
[PLAYBACK] → [CLIP SEL] → [ALL SLOT]/[SAME FORMAT] is set, and then the clips of all the memory cards are displayed. Playback is not possible
across 2 memory cards.
0 Playback stops when the memory card is removed during playback.
Motion picture compatibility
≥ This unit is based on AVCHD Progressive/AVCHD.
≥ Even if the devices used have compatible standards, when playback of clip recorded using another device is performed using this device, or when
clip recorded using this device is played back in another device, playback may not proceed normally, or may not be possible. (Please check
compatibility in the instruction manual of your device.)
≥ Clips recorded with devices other than this unit are not supported by this unit.
Adjusting the volume during playback
You can adjust the playback volume by operating the zoom lever (on the grip).
Towards <T>: Raise the volume
Towards <W>: Lower the volume
≥ If no operations are performed, the setting is ended.
≥ The <EXIT> button is disabled.
@ NOTE
0 The zoom lever (on the handle) cannot be used to adjust the volume.
Chapter 6 Playback — Thumbnail operation
Touch the LCD monitor while playing back, and slide from right to left (left to right).
When sliding from left to right, the clip skips to the beginning of the previous clip if the current playback
position of the clip is at less than 3 seconds from the beginning. The clip skips to the beginning of the
current clip if the current playback position of the clip is at 3 seconds or more from the beginning.
Touch and hold while paused.
( is reverse slow playback)
When is touched, slow playback is performed with continuous frame-by-frame playback.
When is touched, playback returns to normal.
The frame-by-frame interval and the display time for each frame for the reverse slow playback differ
depending on the type of the clip.
Touch while paused.
( is reverse frame-by-frame playback)
When is touched, playback returns to normal.
The frame-by-frame interval for reverse frame-by-frame playback differs depending on the type of the clip.
Touch the direct playback bar, or slide it while touching.
The playback video is paused during the operation. Playback is started by releasing the finger.
- 150 -
Operating procedure
T T
W W