Using The Built-In Led Light; Adjust The Amount Of Light From The Built-In Led Light - Panasonic HC-X1500 Operating Instructions Manual

Using the built-in LED light

By attaching the handle unit (
X2000
1
Slide the <LIGHT> switch to turn on/off the built-in LED light.
ON: Light is on
OFF: Light is off

Adjust the amount of light from the built-in LED light

1
Turn the light dimmer dial.
Turn to <i> to brighten, turn to <j> to dim.
@ NOTE
0 While the built-in LED light is turned on, do not look directly into the lighting part or get it near people's eyes.
0 Using the built-in LED light shortens the time for recording with the battery.
0 When the built-in LED light is turned on, or the brightness of the built-in LED light is changed with the light dimmer dial, depending on the shooting
conditions, the auto tracking white balance function may not work correctly. Adjust the white balance. (l 111)
0 When the remaining battery level gets low, the built-in LED light may turn off. It also may not turn on.
0 If you operate the light dimmer dial during recording, operating noise may be recorded.
Chapter 5 Shooting — Using the built-in LED light
supplied, optional), you can use the built-in LED light to brighten even dark places for recording.
X1500
- 117 -