Panasonic HC-X1500 Operating Instructions Manual page 188

Screen display
Camera image screen
[SCENE FILE LOAD FAILED]
[SCENE FILE WRITE FAILED]
[DISCONNECT USB CABLE.]
[CARD LOCKED.]
[CANNOT SELECT MORE CLIPS.]
[SELECT THE CLIP TO BE
DELETED.]
[SELECT THE CLIPS TO COPY.]
[Insert a card in slot 1.]
[Insert a card in slot 2.]
[REINSERT OR CHECK CARD
<SLOT 1>]/[REINSERT OR CHECK
CARD <SLOT 2>]
[CANNOT COPY.]
[CANNOT RECORD.]
[REC PAUSE INVALID]
[WRITE PROTECTED]
Chapter 10 Notes — Warning system
Description
Loading of the scene file has failed.
Writing of the scene file has failed.
Due to an OS non-compatible error, 5 minutes has elapsed
until the service mode connection is established.
The unit tried to protect or delete a clip on a memory card
that has been locked.
The unit tried to copy a clip to the memory card that has
been locked.
It has tried to select more than 99 clips.
It has tried to delete a clip without choosing any.
It has tried to copy a clip without choosing any.
Copying was tried to be executed without inserting a
memory card into card slot 1.
Copying was tried to be executed without inserting a
memory card into card slot 2.
It has tried to copy to an error card.
Copying was attempted while the system frequency
(59.94 Hz and 50.00 Hz) of the memory card to copy from
and the memory card to copy to are different for content
recorded in AVCHD format.
Cannot be recorded.
The unit tried to stop the next recording before the previous
recording finished writing to the memory card.
The memory card has been write-protected.
≥ Check the memory card.
≥ Check the memory card.
≥ Confirm if the OS in use is supported by the unit.
≥ Unlock the memory card.
≥ Execute the process such as copying by every 99 clips.
≥ Select a clip to be deleted.
≥ Select a clip to be copied.
≥ Insert a memory card into card slot 1.
≥ Insert a memory card into card slot 2.
≥ Check the memory card.
≥ Set the same system frequency (59.94 Hz system or
50.00 Hz system) for the content of the memory card to
copy from and the memory card to copy to.
≥ The system frequency information for the AVCHD format
is confirmed at the time of formatting or at the first
recording.
≥ Perform recording after making it possible.
≥ Stop recording after writing to the memory card is
complete. Recording can be stopped after the message
that is displayed disappears.
≥ Insert a memory card with write access.
- 188 -
Behavior and cause