Network Connection; Available Functions; About The Wireless Lan Function On This Unit - Panasonic HC-X1500 Operating Instructions Manual

Network connection

This unit is equipped with wireless LAN. It can connect to networks via wireless LAN.
Wireless access point
A
Device with wireless LAN
B

Available functions

When the unit is connected to a network, the following functions are available.
≥ Connecting to HC ROP app
≥ Streaming function

About the wireless LAN function on this unit

∫ Use this unit as a wireless LAN device
When using equipment or computer systems that require more reliable security than wireless LAN devices, ensure that the appropriate measures are
taken for safety designs and defects for the systems used. Panasonic will not take any responsibility for any damage that arises when using this unit for
any purpose other than as a wireless LAN device.
∫ Use of the wireless LAN function of this unit is presumed to be in countries where this unit is sold
There is the risk that this unit violates the radiowave regulations if used in countries other than those where this unit is sold, and Panasonic takes no
responsibility for any violations.
∫ There is the risk that data sent and received via radio waves may be intercepted
Please note that there is the risk that data sent and received via radio waves may be intercepted by a third party.
∫ Do not use this unit in areas with magnetic fields, static electricity or interference
≥ Do not use this unit in areas with magnetic fields, static electricity or interference, such as near microwave ovens. Radio waves may not reach this unit.
≥ Using this unit near devices such as cordless telephones or any other wireless LAN device that use the 2.4 GHz radio wave band may cause a
decrease in performance in both devices.
∫ Do not connect to the wireless network you are not authorised to use
When this unit utilises its wireless LAN function, wireless networks will be searched automatically. When this happens, wireless networks that you are not
*
authorised to use (SSID ) may be displayed, however do not attempt to connect to the network as it may be considered as unauthorised access.
* SSID refers to the name of device that is used to identify a network over a wireless LAN connection. If the SSID matches for both devices, transmission is
possible.
∫ Before use
To use the wireless LAN function on this unit, you need a wireless access point or a device connected that has wireless LAN functionality.
For the operations and settings of the device you are using, such as iPhone/iPad or Android handset, refer to the operating instructions for your device.
∫ This unit is WPS-compatible
™
WPS (Wi-Fi Protected Setup ) is a function that allows you to easily set up a connection with a wireless LAN device and make security-related settings.
@ NOTE
0 This unit cannot be connected to wireless LAN devices via public wireless LAN environments.
0 The wireless access point must be compatible with IEEE802.11b, IEEE802.11g, or IEEE802.11n.
0 This unit uses the 2.4 GHz frequency band. You cannot establish a wireless LAN connection using the 5 GHz frequency band.
0 When using a wireless access point, we strongly recommend that you set a encryption to maintain information security.
0 Depending on the signal status, it may not be possible to connect to wireless LAN devices via a network.
0 If the wireless LAN connection is not working well, set up so the wireless LAN transmitter (l 19) faces towards the wireless LAN device.
0 When the battery indicator (
0 When you are using the wireless LAN function of this unit, the wireless LAN transmitter (l 19) may become warm but this does not indicate a
malfunction.
Chapter 9 Network Connection — Network connection
) is flashing red, the connection with other equipment may not start or the connection may be disrupted.

- 171 -
