Panasonic HC-X1500 Operating Instructions Manual page 48

Item (USER button icon display)
[ONE PUSH AF] ([ONE PUSH AF])
[S.GAIN] ([S.GAIN])
[AREA] ([AREA])
[ATW] ([ATW])
[ATW LOCK] ([ATW LOCK])
[SPOTLIGHT] ([SPOTLIGHT])
[BACKLIGHT] ([BACKLIGHT])
[AE LEVEL] ([AE LEVEL])
[Y GET] ([Y GET])
[O.I.S.] ([O.I.S.])
[i.ZOOM] ([i.ZOOM])
[D.ZOOM] ([D.ZOOM])
[IR REC] ([IR REC])
[FAST ZOOM] ([FAST ZOOM])
[PRE REC] ([PRE REC])
[SUPER SLOW] ([SUPER SLOW])
[BACKGR PAUSE] ([BACKGR PAUSE])
[REC CHECK] ([REC CHECK])
[DEL LAST CLIP] ([DEL LAST CLIP])
[FOCUS ASSIST] ([FOCUS ASSIST])
[WFM] ([WFM])
[ZEBRA] ([ZEBRA])
[LEVEL GAUGE] ([LEVEL GAUGE])
[LEVEL GAUGE SET] ([LEVEL GAUGE SET])
[LCD/VF DETAIL] ([LCD/VF DETAIL])
[FACE DETECT] ([FACE DETECT])
[MENU] ([MENU])
[LOAD SETUP FILE] ([LOAD SETUP FILE])
[LCD BACKLIGHT] ([LCD BACKLIGHT])
[CARD READER MODE] ([CARD READER MODE]) Switches enable/disable of the card reader mode function (USB mass storage function).
[STREAMING START] ([STREAMING START])
[COUNTER] ([COUNTER])
[RESET] ([RESET])
[REAR RING] ([REAR RING])
@
NOTE
0 The following functions are disabled the next time you turn the unit on after turning it off with the power.
j [FBC], [S.GAIN], [AREA], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [Y GET], [D.ZOOM], [FAST ZOOM], [REC CHECK], [DEL LAST CLIP],
[FOCUS ASSIST], [WFM], [CARD READER MODE], [STREAMING START]
0 The following functions cannot be set when IR recording is enabled.
j [AWB], [ATW], [ATW LOCK], [SPOTLIGHT], [BACKLIGHT], [AE LEVEL], [FACE DETECT]
0 In auto mode, the following functions cannot be set:
j [AWB], [FBC], [ONE PUSH AF], [ATW], [FOCUS ASSIST]
0 USER button functions can also be set from the following menus:
USER button functions
[DRS]
[AE LEVEL]
[O.I.S.]
[i.ZOOM]
[IR REC]
[PRE REC]
Chapter 3 Preparation — Assigning function to the USER buttons
Assigns the one-push auto focus function.
Assigns the function that switches to super gain.
Assigns the area function.
Switches enable/disable of the auto tracking white balance function.
Fixes the value of the white balance. Press the USER button again or touch the USER button icon to
resume the operation of the auto tracking white balance.
Enable when the auto tracking white balance is operating.
Switches enable/disable of the auto iris control function for the spot light.
Switches enable/disable of the auto iris control function for the backlight compensation.
Switches enable/disable of the AE level function.
Assigns the function that displays the luminance level of the frame area displayed near the center.
Switches enable/disable of the optical image stabilizer function.
Assigns the zoom function to minimize image distortion.
Switches enable/disable of digital zoom. Zooms in on the field angle by 2×, 5×, and 10× vertically and
horizontally each time the USER button is pressed or the USER button icon is touched.
Switches enable/disable of IR recording.
Speeds up the zoom speed when the zoom lever is pushed in all the way.
Switches enable/disable of pre-recording.
Switches enable/disable of the super slow recording function.
Assigns the function that stops the background recording of card slot 2.
Press and hold the USER button to which [BACKGR PAUSE] is assigned for approximately 5 seconds or
touch and hold the USER button icon for approximately 5 seconds and release to stop background
recording.
Automatically plays back the last approximately 3 seconds of the previously shot clip.
Deletes the clip last shot.
Switches enable/disable of the focus assist function.
Switches the display of the waveform monitor. The waveform display is selected in the [VIDEO OUT/LCD/
VF] menu → [EI ASSIST] → [WFM MODE].
Switches display/hide of zebra patterns.
Switches display/hide of the level gauge.
Sets the current horizontal and vertical direction as the reference value of the level gauge.
Adjusts the intensity for the contour of the video in the viewfinder or LCD monitor to make it easier to focus.
Switches enable/disable of the face detection AE&AF function.
Switches display/hide of the menu.
Selects the setup file saved on the memory card to load on the unit.
Switches the brightness of the LCD monitor. Each time you either press the USER button or touch the
USER button icon, the brightness switches in the order [0], [1], [2], [-1].
≥ Release the connection to enable the card reader mode when connected to a network via a wireless LAN.
(The unit returns to the original setting when the card reader mode is disabled.)
Starts/stops streaming from the unit.
Streaming starts only during RTMP streaming.
Switches the time code display. (Time code display/user bits display/counter display/no display)
Resets the counter value.
The rear ring operation is switched. (Zoom/iris/iris and AE level)
[SCENE FILE] menu → [DRS]
[SCENE FILE] menu → [AE LEVEL]
[CAMERA] menu → [SW MODE] → [O.I.S.]
[CAMERA] menu → [SW MODE] → [i.ZOOM]
[CAMERA] menu → [SW MODE] → [IR REC]
[RECORDING] menu → [PRE REC]
Description
Menu settings
- 48 -