Panasonic HC-X1500 Operating Instructions Manual page 63

[ATW]
You can set ATW (auto tracking white balance function) when the <WHITE BAL> button is pressed.
[Ach]
[Bch]
[PRE]
[OFF]
(Factory setting: [OFF])
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
≥ [FAST], [NORMAL]
(Factory setting: [NORMAL])
[ATW TARGET R]
Make fine adjustments to the strength of red when converging with the auto tracking white balance operation.
The items that can be set are as follows.
≥ [j10]...[i10]
(Factory setting: [0])
[ATW TARGET B]
Make fine adjustments to the strength of blue when converging with the auto tracking white balance operation.
The items that can be set are as follows.
≥ [j10]...[i10]
(Factory setting: [0])
[W.BAL PRESET]
Sets the color temperature for when the <WHITE BAL> button is pressed to switch to "Preset".
The items that can be set are as follows.
≥ [3200K], [5600K], [VAR]
(Factory setting: [3200K])
[W.BAL VAR]
Sets the value of [VAR] in [W.BAL PRESET].
The setting can also be operated by the multidial.
This is enabled when [W.BAL PRESET] is set to [VAR] and you press the <WHITE BAL> button to switch to "Preset".
The items that can be set are as follows.
≥ [2000K]...[15000K]
(Factory setting: [3200K])
[H.ZOOM SPEED]
Sets the zoom speed of the handle zoom.
The items that can be set are as follows.
≥ [1]...[7]
(Factory setting: [4])
[i.ZOOM]
When [i.ZOOM] is set to [ON], you can zoom to a maximum of approximately 48× (32× when recording with UHD) while maintaining the beauty of high-
definition image quality.
[ON]
[OFF]
(Factory setting: [OFF])
[REAR RING]
Switches the rear ring operation.
[ZOOM]
[IRIS]
[IRIS/AE LEVEL]
(Factory setting: [ZOOM])
@ NOTE
0 You can also either press the USER button assigned to [REAR RING] or touch the USER button icon to switch the setting of the rear ring operation.
Chapter 4 Operation — Menu settings
If you have pressed the <WHITE BAL> button to switch to [Ach], this is set to [ATW].
If you have pressed the <WHITE BAL> button to switch to [Bch], this is set to [ATW].
If you have pressed the <WHITE BAL> button to switch to "Preset", this is set to [ATW].
Even if you press the <WHITE BAL> button, [ATW] does not turn on.
Enables the i.ZOOM function.
Disables the i.ZOOM function.
Performs zoom operations with the rear ring.
Adjusts the iris with the rear ring.
Adjusts the iris or AE level with the rear ring.
- 63 -