Panasonic HC-X1500 Operating Instructions Manual page 89

[UPDATE]
Updates the firmware.
Insert the memory card where the update file is saved into card slot 1.
The items that can be selected are as follows.
≥ [YES], [NO]
[ECO MODE]
By setting [OTHERS] menu → [ECO MODE] → [BATTERY]/[AC]/[NETWORK], when there is no button operation or LCD monitor touch operation
performed for a certain time, the power turns off automatically.
@ NOTE
0 In the following cases, even if [BATTERY], [AC], or [NETWORK] is set to [ON], the power will not automatically turn off.
j While a memory card is being accessed (during recording, during playback, while formatting the media, etc.)
j During pre-recording
j In card reader mode
0 In the following case, even if [BATTERY] is set to [ON], the power will not automatically turn off.
j When using the AC adaptor
0 In the following cases, the power will not automatically turn off.
j When connected to a network via wireless LAN
* The power turns off automatically if the [AC] eco mode functions.
[BATTERY]
When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.
The items that can be selected are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[AC]
If there are no operations for approximately 15 minutes while using the AC adaptor, the power turns off automatically.
The items that can be selected are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[NETWORK]
If there are no operations for approximately 15 minutes when the [NETWORK] menu → [DEVICE SEL] → [WLAN] is set while not connected to the
network via a wireless LAN, the power turns off automatically.
The items that can be selected are as follows.
≥ [ON], [OFF]
(Factory setting: [ON])
[LANGUAGE]
Sets the display language.
The items that can be selected are as follows.
[English]
[Español]
[Français]
[Deutsch]
[Italiano]
[Nederlands]
[Türkçe]
[Svenska]
[Polski]
[Česky]
[Magyar]
(Factory setting: [English])
[MENU INITIALIZE]
Returns the setting value of the menu to the factory setting. The unit is restarted after executing.
Chapter 4 Operation — Menu settings
*
English
Spanish
French
German
Italian
Dutch
Turkish
Swedish
Polish
Czech
Hungarian
- 89 -