[Video Out/Lcd/Vf] Menu - Panasonic HC-X2050 Operating Instructions Manual

[MIC LIMITER LINK]
Sets whether to make the limiter work on the other audio channel when the limiter works in either audio channel 1 or audio channel 2.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
@
NOTE
0 In the following case, [MIC LIMITER LINK] is fixed to [OFF]:
j [CH1 LIMITER] or [CH2 LIMITER] is set to [OFF]
[OUTPUT SETTINGS]
[AUDIO OUT]
Sets the audio channel and the format to output from the headphone terminal, and the built-in speaker.
[CH1]
[CH2]
[CH1/2 STEREO]
[CH1/2 MIX]
(Factory setting: [CH1/2 STEREO])
[ALARM]
Sets whether to have an alarm sound.
The alarm is output from the speaker of this unit or the headphones. It is not output to external output destinations.
[BATTERY END]
Sets whether to sound the alarm when the remaining battery level is exhausted.
The items that can be set are as follows.
≥ [HIGH], [LOW], [OFF]
(Factory setting: [OFF])
[MEDIA END]
Sets whether to sound the alarm when the remaining recording capacity of the memory card is exhausted.
The items that can be set are as follows.
≥ [HIGH], [LOW], [OFF]
(Factory setting: [OFF])
[WARNING]
Sets whether to sound the alarm when a system error or warning occurs.
The items that can be set are as follows.
≥ [HIGH], [LOW], [OFF]
(Factory setting: [OFF])

[VIDEO OUT/LCD/VF] menu

Configures the settings for the external output, the information to display in the LCD monitor or viewfinder and the output format.
/
X2000 X2050
[VIDEO OUT SEL]
Switches the output destination for images and audio.
[SDI]
[HDMI]
(Factory setting: [HDMI])
/
X2000 X2050
[SDI OUT]
¥ Set the [VIDEO OUT/LCD/VF] menu  [VIDEO OUT SEL] to [SDI].
[OUT FORMAT]
Selects the signal to output from the <SDI OUT> terminal. The items that can be selected differ depending on the [SYSTEM] menu  [FREQUENCY]/
[FILE FORMAT]/[REC FORMAT] setting.
[19201080p]
[19201080i]
[19201080PsF]
[1280720p]
(Factory setting: [19201080i])
Chapter 4 Operation — Menu settings
Outputs the signal for audio channel 1 as monaural.
Outputs the signal for audio channel 2 as monaural.
Outputs the signals of the audio channel 1 and the audio channel 2 as stereo. Outputs as monaural from the built-in speaker.
Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.
Outputs from the <SDI OUT> terminal.
Outputs from the <HDMI> terminal.
Outputs in 19201080p.
Outputs in 19201080i.
Outputs in 19201080PsF.
Outputs in 1280720p.
- 74 -