Panasonic HC-X1500 Operating Instructions Manual page 163

AUDIO screen
Displays the audio input/output settings and the audio level meter.
[HANDLE] [HANDLE STATUS]
[AUDIO] [SOURCE]
[LEVEL]
[LIMITER]
[LOWCUT]
Audio lebel meter
[AUDIO OUT]
SWITCH screen
Displays the values assigned to the USER switch, super gain, and white balance.
[USER SW]
[OTHER ASSIGN]
NETWORK screen
Displays the settings of the network function.
[NETWORK]
Chapter 7 Output and Screen Display — Screen status display
Item
[CH1] to [CH2]
[CH1] to [CH2]
[CH1] to [CH2]
[CH1] to [CH2]
Item
[1] to [5]
[S.GAIN]
[WHITE BAL A]
[WHITE BAL B]
[WHITE BAL PRST]
Item
[DEVICE SEL]
[NETWORK FUNC]
[STRM FORMAT]
[IP REMOTE]
[IPv4 ADDRESS]
Displays with [ATTACHED]/[DETACHED] whether the handle unit (
supplied, optional) is attached.
X1500
Displays the audio recorded to each channel.
≥ When the handle unit is attached
j [CH1]: [INT(L)]/[MIC(L)]/[INPUT1(MIC)]/[INPUT1(LINE)]/
[INPUT1(MICi48V)]
j [CH2]: [INT(R)]/[MIC(R)]/[INPUT1(MIC)]/[INPUT1(LINE)]/
[INPUT1(MICi48V)]/[INPUT2(MIC)]/[INPUT2(LINE)]/[INPUT2(MICi48V)]
≥ When the handle unit has not been attached
j [CH1]: [INT(L)]/[MIC(L)]
j [CH2]: [INT(R)]/[MIC(R)]
Displays the adjustment method of the recording level of the audio for each
channel with [AUTO]/[MANU].
Displays enable/disable of limiter for each channel with [ON]/[OFF].
Displays [---] when the adjustment method of the recording level of the audio is
set to [AUTO].
Displays enable/disable of low-cut filter for each channel with [ON]/[OFF].
Enlarges the display of the audio level meter displayed on the camera image
screen.
Displays with [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX] the audio channel
format output from the headphone jack and the built-in speaker.
Displays the function assigned to <USER1> through <USER5> buttons.
Displays the list of gain values assigned as a super gain.
Displays the setting status of the [Ach] of the white balance as either [OK] or
[NG].
Displays [ATW] when the auto tracking white balance function is assigned.
Displays the setting status of the [Bch] of the white balance as either [OK] or
[NG].
Displays [ATW] when the auto tracking white balance function is assigned.
Displays the color temperature assigned to the "preset" of white balance.
Displays [ATW] when the auto tracking white balance function is assigned.
Color temperature and [VAR] are displayed when "VAR" is assigned.
Displays the device used for network connection in [WLAN] (wireless LAN)/
[OFF].
Displays the network function of the unit with [STREAMING]/[OFF].
Displays the streaming format.
It is not displayed when set to the [NETWORK] menu → [NETWORK FUNC] →
[OFF].
Displays enable/disable of the IP remote function with [ENABLE]/[DISABLE].
Displays the IP address of IPv4.
It is not displayed when set to the [NETWORK] menu → [DEVICE SEL] →
[OFF].
- 163 -
Description
Description
Description
X2000