Panasonic HC-X1500 Operating Instructions Manual page 88

[CLOCK]
[CLOCK SETTING]
Sets the calendar (date of the built-in clock) and time.
Year
Month
Day
Hour
Minute
[TIME ZONE]
Sets the time zone. It will switch to the time with the time difference added when the time zone setting is changed.
The items that can be set are as follows.
≥ [j12:00]...[i12:00] (30 minutes steps), [i12:45], [i13:00]
(Factory setting: [i0:00])
[DATE FORMAT]
Sets the display order of the year, month, and date of the calendar (date of the built-in clock). This is reflected to the date display of the clip information.
The items that can be set are as follows.
≥ [Y-M-D], [M-D-Y], [D-M-Y]
(Factory setting: [D-M-Y])
[USB DEVICE]
[CARD READER MODE]
Switches the unit to the card reader mode. A computer or other device can be connected via USB to use as a card reader of the memory card.
The items that can be selected are as follows.
≥ [YES], [NO]
@
NOTE
0 When switched to card reader mode while using a battery, the LCD monitor turns off after approximately 5 seconds.
The LCD monitor turns on when you perform the following operations:
j Turn the multidial up or down
j Touch the LCD monitor
0 To exit the card reader mode, do one of the following operations:
j Turn the power off
j Press the <EXIT> button
j Press the multidial
j Touch [ ]
[SERVICE MODE]
Switches the unit to the service mode.
You can also check software information (licenses) on a computer and other equipment. Confirm "LICENSE.TXT" for the external drive recognized by a
computer.
The items that can be selected are as follows.
≥ [YES], [NO]
@ NOTE
0 When switched to service mode while using a battery, the LCD monitor turns off after approximately 5 seconds.
The LCD monitor turns on when you perform the following operations:
j Turn the multidial up or down
j Touch the LCD monitor
0 To exit the service mode, do one of the following operations:
j Turn the power off
j Press the <EXIT> button
j Press the multidial
j Touch [ ]
[INFORMATION]
[VERSION]
Displays the information of the unit.
[MODEL]
[SERIAL NO.]
[VERSION]
[OPERATION TIME]
Displays the total operation time.
Chapter 4 Operation — Menu settings
[2018]...[2037]
[JAN]...[DEC] ([1]...[12])
[1]...[31] (This changes according to the year and month settings)
[0]...[23]
[0]...[59]
Displays the product name of the unit.
Displays the serial number of the unit.
Displays the firmware version of the unit.
- 88 -