Table of Contents
Advertisement
Recording
Using the Built-in LED Light
Even in dark locations, you can record brighter scenes by turning on the built-in LED light.
Slide the LED LIGHT switch to turn on the built-in LED light.
≥ Do not look at the light-emitting portion of the built-in LED light directly while the light is turned on,
or bring the portion close to someone's eyes and turn on the light.
≥ The recordable time with the battery becomes shorter with the use of the built-in LED light.
≥ The White Balance mode [ATW] (Auto Tracking White Balance) may not work correctly while the
built-in LED light is turned on, depending on recording conditions. In this case, switch to Manual
Mode and adjust the White Balance.
≥ When the battery becomes low, the built-in LED light may not turn on.
∫ Using the diffusion filter (supplied) of the built-in LED light
The supplied diffusion filter softens the light by reducing its glare.
Use the diffusion filter when the built-in LED light is too bright.
Attaching/removing the filter for the built-in LED light
(How to attach/detach the filter)
≥ Push in until a clicking sound is heard.
≥ Hold both the left and right sides of the filter to remove it.
LED LIGHT switch
Slide the switch to turn on/off the built-in LED
light.
ON: Turned on
OFF: Turned off
(l
56)
- 45 -
Advertisement
Table of Contents
