Installation of the Appliance
Optional Wi-Fi Kit Installation
The Kit contains the following components:
•
1 x Wi-Fi Dongle.
•
5 x self-adhesive aluminum clips.
•
1 x Wi-Fi lead.
•
2 x M3 nuts and washers
Remove the 2 off screws retaining the ECU cover from the LH side of the burner carrier. Lift off the
cover plate to allow access to the ECU unit.
Within the ECU unit will be a clear port connection labeled
"SENSOR." Inset the Wi-Fi connector plug within the open port.
Connect the opposite end to the lead within the Wi-Fi Dongle.
P a g e
| 29
600 HD INSTALLATION INSTRUCTIONS
LT7618 Issue No 1 (06/2018)