Table of Contents
Advertisement
800 HD with UBL USERS INSTRUCTIONS
Lighting the Appliance & General Operation Of Control
Handset up video
Display overview
Press
to awaken the handset from its dormant sleep mode at any time. Fig 1 shows the
display neutral, ready to turn on.
Turn on (start up).
Pressing and holding
displays an "UNLOCK" graphic Fig 2 prompting the
button to be
pressed simultaneously. Whilst both
&
are pressed a progress bar Fig 3 will complete. If
either button is released before the progress bar has completed the operation will cancel. Once
the progress bar has completed the handset will display the status of the fire (priming – ignition –
pilot – main burner) finishing at the fire "on" display screen Fig 4.
Note: if repeated delayed ignition is experienced during start-up it is recommended that the
appliance is checked by a gas safe engineer
LT 7941 Issue No 3 (04/22)
P a g e
| 4
Advertisement
Table of Contents
