Installation of the Appliance
Optional Wi-Fi Kit Installation
Set up video can be found at:
Apple:
http://www.charltonandjenrick.co.uk/appleguide/
The Kit contains the following components:
1 x Wi-Fi Dongle.
5 x self adhesive aluminum clips.
1 x Wi-Fi lead.
2 x M3 nuts and washers
Remove the 2 off screws retaining the ECU cover from the LH
side of the burner carrier. Lift off the cover plate to allow
access to the ECU unit.
Within the ECU unit will be a clear port connection labeled
"SENSOR." Inset the Wi-Fi connector plug within the open port.
Connect the opposite end to the lead within the Wi-Fi Dongle.
P a g e
| 33
780 HD INSTALLATION INSTRUCTIONS
Android:
http://www.charltonandjenrick.co.uk/androidguide/
LT7185 Issue No 1 (04/17)