Infinity 600HD Instruction For User, Installation & Servicing page 24

600 HD INSTALLATION INSTRUCTIONS
Open the firebox aperture as of the sizes stipulation in the section (50mm rebated surround).
Please note the fire box height from the floor may well vary dependent on the fireplace surround
design. Check the fireplace details first. Slide the fire box back into the catchment area and
secure the fire box against the front face of the chimney breast. Fit the fire place frame to the
firebox flange. The fireplace surround can now be constructed.
The 600 HD can be installed using three different methods when going hole in the wall.
A- Hole in the wall using none combustible slips.
B-Dry lined hole in the wall.
C-Wet plaster hole in the wall.
LT7618 Issue No 1 (06/2018)
P a g e | 23