Table of Contents
Advertisement
Installation of the Appliance
Optional Wi-Fi Kit Installation
The Kit contains the following components:
1 x Wi-Fi Dongle.
5 x self adhesive aluminum clips.
1 x Wi-Fi lead.
2 x M3 nuts and washers
Remove the 2 off screws retaining the ECU cover from the LH side of
the burner carrier. Lift off the cover plate to allow access to the ECU
unit.
Within the ECU unit will be a clear port connection labeled
"SENSOR." Inset the Wi-Fi connector plug within the open port.
Connect the opposite end to the lead within the Wi-Fi Dongle.
P a g e
| 35
480 HD INSTALLATION INSTRUCTIONS
LT 7602 Issue No2 (07/17)
Advertisement
Table of Contents
