Maintenance - Infinity 600HD Instruction For User, Installation & Servicing

600 HD MAINTENANCE INSTRUCTIONS

Maintenance

To Remove the Burner Carrier Assembly
Remove the glass panel as described on page 8 of the user's instruction section.
Remove the Loose shapes and the air tray assembly.
Remove the four screws retaining the gas inlet plate and the ECU cover. (Please see Fig 1)
Shut off the restrictor elbow and disconnect the 8mm inlet nut.
Switch off the mains supply from the main supply plug socket.
Undo the two M3 nut retaining the ECU unit and remove the connection bracket plus
disconnect the mains supply cable connection.
Take out the three screw retaining the burner tray assembly and lift out of the fire box shelf
taking care not to damage the panels. (Please see Fig 2)
LT7618 Issue No 1 (06/2018)
P a g e | 44