Infinity 600HD Instruction For User, Installation & Servicing page 39

Slide the glass in front of the frame and push in to place making sure that the glass is pushed in
to the glass channel properly and sits in the bottom of it and that the inner frame is still central.
Make sure that the glass is
sat in the bottom of the
glass channel
Position the top fixing bracket over the top edge of the glass panel and slide over the two M4
studs.
Using the two M4 nuts previously removed. Tighten the top glass fixing using the nut runner
provided with the appliance being careful not to over tighten the glass as this will cause
breakages.
Spillage Test Procedure.
Light the appliance on maximum setting.
Close all the doors and windows.
After five minutes fit the smoke match within match holder and position as illustrated in Figure 13
with the head of the match just inside the inlet air channel.
P a g e | 38
600 HD INSTALLATION INSTRUCTIONS
Push the glass in to place
so it sits flat against the
frame
LT7618 Issue No 1 (06/2018)