Infinity 600HD Instruction For User, Installation & Servicing page 35

Keyhole slot must be fully engaged to maintain
the 10mm clearance between the glass fixing
bracket and the bottom internal edge of the
fireplace frame
Hole in the wall.
For hole in the wall installation, two additional fixing brackets will be needed that are attached
to the fireplace frame LH and RH. Attached the two brackets using the 6 off fixing screws
provided with the kit. Secure the complete assembly using suitable rawl plugs and wood screws
via two 6mm holes within the wall fixing brackets. (Please see Figure 7).
(Please Note). The fireplace frame is supplied with
the slip guides attached. To improve the overall
appearance of the appliance the guide brackets
can be detached by removing the No 6 self
tapping screws from the fireplace frame assembly.
P a g e | 34
600 HD INSTALLATION INSTRUCTIONS
Important
When fitting the fireplace frame the studs need
to be fully engaged to the top of the keyhole
slot (as shown). If this is not fully engaged, it
may cause ignition and outing issues
Hole in the wall fixing
brackets. Attach to the
frame assembly using the
six self-tapping screws
provided
6mm fixing holes
LT7618 Issue No 1 (06/2018)