Display - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

MUX20JP021602 INSTRUMENTS AND CONTROLS

9.1.1. Display

The display is used to view the status of the machine and the operating informa‐
tion necessary or useful for the operator. When the machineʹs main control board
is powered via the engine key, the information to be shown on the display is sent
to the remote control. This operation has a variable duration. Normally a few se‐
conds are sufficient, however the following screen may appear on the display:
Fig. 30 Download icons remote control
In this case about 10‐15 minutes are needed to send all the information from the
main board to the remote control. The machine cannot work during this period.
Do not stop the machine or operate it during this period.
Display main screen
When the machine is started, the main screen is displayed, giving a general over‐
view of the machine status. For the sake of simplicity and clarity a layout is pro‐
vided with 8 icon display positions.
Fig. 31 Main screen example Fig. 32 Location diagram icons
Boom Lift Models X20JPLUS 55