Moving The Undercarriage With The Machine Not Aligned - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

MUX20JP021602
Fig. 128 Emergency BY‐PASS decals
The display on the remote control shows the safety device BYPASS icon.
Fig. 129 Emergency BY‐PASS icon
Realign the machine, controlling it from the basket by means of the
remote control.
Perform exclusively the rotation manoeuvre.]
Once the machine has been aligned, release the key, remove it, put it back in its
original position and close the electrical components compartment.
11.5.5.2. Moving the undercarriage with the machine not aligned
Operation allowed only to reach the conditions necessary to perform the proce‐
dure described in the ʺMachine realignment (p. 124)ʺ. Any other use is prohibi‐
ted.
Fig. 130 Emergency BY‐PASS activated
Boom Lift Models X20JPLUS
USING THE MACHINE
3 Turn the emergency key
anticlockwise and hold
it in position;
125