MUX20JP021602
7.6. GENERAL SAFETY STANDARDS
Warning
The functioning of the MEWP must be in compliance with international stan‐
dards of reference see ʺNormative reference (p. 11)ʺ, and national or regional
standards if stricter. The operator must read, understand and follow all the in‐
structions and warnings, contained in this manual and on the machine, regarding
the safe use of the MEWP.
Attention ‐ danger
FAILURE TO COMPLY WITH THE SAFETY PRECAUTIONS LISTED IN THIS
SECTION AND PROVIDED ON THE MACHINE CAN DAMAGE THE MACHI‐
NE AND CAUSE INJURY OR EVEN DEATH, AND CONSTITUTES A SERIOUS
BREACH OF THE SAFETY RULES.
This section of the USER AND OPERATION MANUAL describes those procedu‐
res or dangerous situations that can cause damage/injury to objects/persons and
explains what the operator must do to prevent them.
• Operators must always act professionally, complying with safety standards,
making sure not to underestimate their responsibility to themselves and the sur‐
rounding objects and persons.
• Before starting work, operators must receive complete and clear training re‐
garding the use of the machine in standard and emergency conditions.
• They must examine, understand and take in all the instructions given in
this user manual. They must be sure that the safety devices are in perfect wor‐
king order, perform the necessary checks on the machine and be familiar with
the conditions of the ground on which the machine is going to be operated and
stabilised.
• The presence of at least one specialist operator is necessary on the ground du‐
ring work. This person must know how to use the machine, be aware of the con‐
tents of the USER AND OPERATION MANUAL and be able to intervene if
necessary.
Boom Lift Models X20JPLUS
TECHNICAL INFORMATIONS
25