Electrical Connection Of Remote Control - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

MUX20JP021602
11.6.ELECTRICAL CONNECTION OF REMOTE CONTROL
The electrical disconnection/connection of the remote control MUST be car‐
ried out exclusively with the motor key in position OFF and with the mains
power disconnected.
• Disconnect the cable from the remote control using the corresponding screw
connection.
• Make sure there is no moisture in the remote control connector and close the
remote control sealing plug.
• Make sure there is no moisture in the electric cable connector and close the
electric cable sealing plug.
• To reconnect the remote control, follow the same process in the reverse order.
Fig. 143 Remote control connection
Boom Lift Models X20JPLUS
USING THE MACHINE
131