Maintenance Control Position - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

MUX20JP021602 INSTRUMENTS AND CONTROLS
Fig. 60 Carter hydraulic control ground Fig. 61 Carter hydraulic control aerial
part part
DANGER
The emergency control position was designed to operate on the extensible
structure only for emergency operations by emergency service personnel on
the ground, who must in any case be trained and know the operation of the ma‐
chine and its safety devices, as well as for maintenance and checks before star‐
ting work.
If an operator is in the basket, it is forbidden to move the structure from the
ground position, unless in an emergency situation (sudden operator illness, te‐
chnical fault).
9.3.4. Maintenance control position
There is a control position usable only for operations of ordinary and extraordi‐
nary maintenance operations, position placed next the machine near the electric
components box.
At the back of the protection box of the circuit board an auxiliary connector is pla‐
ced for the connection of the optional second remote control.
Boom Lift Models X20JPLUS 67