USING THE MACHINE
MUX20JP021602
11.4.12.Moving the basket
Once the machine has been stabilised correctly, check the icon in pos. 5 ʺFig.
39 Stabilized machine(p. 56)ʺ, the basket can be moved.
DANGER
It is prohibited to load material of any type into the basket if the machine is not
stabilised and completely closed. To load and unload the basket the icon in po‐
sition 6 on the remote control must be displayed ʺFig. 42 Aerial part closed and
aligned(p. 57)ʺ. Loading material into the basket when it is lifted (e.g. from ro‐
ofs, balconies etc.) causes the machine to overturn, exposing the occupants and
personnel on the ground to potential risk of death.
It is absolutely forbidden to use the machine to lift loads both in the basket and
connected in other way to the structure; the machine can lift two persons and
their tools. See ʺTechnical data (p. 19)ʺ for data related to the admitted load on
basket.
During machine lowering, near where the upper arms rest on the lower ones, a
potential shearing risk is created, appropriately signalled by stickers; it is the
userʹs responsibility to move any persons away from this area.
Fig. 97 Example potential
Fig. 98 Example potential
Fig. 99 Example potential
shearing risk zone 1
shearing risk zone 2
shearing risk zone 3
Pay maximum attention to obstacles that may collide with the various parts of
the machine during movement. Before carrying out ANY movement, make
sure that nothing can interfere with ANY part of the machine (branches, pro‐
truding parts of buildings, etc.).
It is prohibited to introduce objects into the basket that provide high resistance
to wind pressure (e.g. large signs) even if they are within the machineʹs capaci‐
ty limits.
106
Boom Lift Models X20JPLUS