Battery Cut-Out Switch; Distributor Pressure Relief Valves - JLG X20JPLUS Operator, Safety, Maintenance And Service Manual

SAFETY DEVICE
8.1. BATTERY CUT‐OUT SWITCH
Fig. 7 Battery cut out switch thermal En‐
gine version
This device is used to isolate the machineʹs electrical circuit. It is well visible and
easily accessed without using tools. It only needs to be activated for prolonged
machine downtime or maintenance operations. Turning the key clockwise closes
the machineʹs electrical circuit, while turning it anticlockwise isolates the machi‐
neʹs electrical circuit and the key can be removed.
Before disconnecting the battery by means of this device, make sure
that the engine key is in position "off" and the remote control and
electronic board are off.
8.2. DISTRIBUTOR PRESSURE RELIEF VALVES
Fig. 9 Aerial part pressure relief valve
42
Fig. 8 Battery cut out switch Lithium ver‐
Fig. 10 Ground part pressure relief valve 1
Boom Lift Models X20JPLUS
MUX20JP021602
sion